Display the OVSDB Replication State

Note

Exception: only supported on VSP 7200 Series, VSP 7400 Series, VSP 8200 Series, and VSP 8400 Series.

Use the following procedure to display the OVSDB replication state.

Procedure

To enter User EXEC mode, log on to the switch.
Display the OVSDB controller status:

show ovsdb replication state

Example

The following is an example of displaying the OVSDB replication state.

SWITCH:1>show ovsdb replication state
==========================================================================================
                           Ovsdb Replication Status
==========================================================================================
Local NLS IP         Peer NLS IP          State
------------------------------------------------------------------------------------------
192.0.2.2              192.0.2.3          ENABLED