Display Remote VTEP Information

Note

Exception: only supported on VSP 7200 Series, VSP 7400 Series, VSP 8200 Series, and VSP 8400 Series.

Use the following procedure to display information about the remote VTEP.

Procedure

Enter Privileged EXEC mode:

enable
Display information about all of the remote VTEPs or use the option to specify a particular VTEP:

show vtep remote [<1–500>]

Example

Switch:1# show vtep remote 
==========================================================================
                              Remote VTEP Info 
==========================================================================
ID    NAME         VTEP         L3_VTEP_NEXT_HOP_INFO
                   DEST-IP      PORT/MLT      VLAN      VRF
-----------------------------------------------------------------------------
1     vtep-1       198.51.100.6    Mlt78      3851      GlobalRouter 
56    vtep-56      198.51.100.22   Mlt130     3855      underlay-vxlan 

-------------------------------------------------
  2 out of 2 Total Num of remote vteps
-------------------------------------------------