Configure an ACE Ethernet VLAN Tag Priority
Perform this procedure to filter for specific VLAN tag priorities.
Before you begin
The ACL exists.
The ACE exists.
Procedure
- In the navigation tree, expand the following folders: .
- Select Advanced Filters (ACE/ACLs).
- Select the ACL tab.
- Select the appropriate ACL.
- Select ACE.
- Select the appropriate ACE.
- Select Eth.
- Select the Vlan Tag Priority tab.
- Select Insert.
- Specify the operation type.
- In the VlanTagPrio box, select the priority bits.
- Select Insert.
VLAN Tag Priority field descriptions
Use the data in the following table to use the Vlan Tag Priority tab.
|
Name |
Description |
|---|---|
|
AclId |
Specifies the ACL ID. |
|
AceId |
Specifies the ACE ID. |
|
Oper |
The eq and mask parameters specify an operator for a field match condition: equal to or mask. The mask operator is an implied eq on the mask bits. |
|
VlanTagPrio |
Specifies the priority bits (3-bit field) from the 802.1Q/p tag:
|
|
OperMask |
Specifies the mask value in hexadecimal format if the Oper value is mask. |