Configure a VNID

Note

Exception: only supported on VSP 7200 Series, VSP 7400 Series, VSP 8200 Series, and VSP 8400 Series.

Use the following procedure to configure a VNID, which identifies one of the potential 16 million VXLAN segments that can coexist within the same administrative domain.

Procedure

In the navigation pane, expand Configuration > Edit.
Select VTEP.
Select the Vnid tab.
In the Identifier field, assign a unique value to this VNID.
In the Isid field, specify the I-SID associated with this VNID.
In the Action field, select one of the available actions: none or flush.
Select Apply.

Vnid field descriptions

Use the data in the following table to use the Vnid tab.


Name	Description
Identifier	Specifies a value that uniquely identifies the VNID of this VXLAN tunnel end point.
Isid	Specifies a value that uniquely identifies the I-SID associated with this VXLAN tunnel end point. Note: A VNID must not have the same value as an I-SID.
Action	Choose one of the following actions to take with the MAC FDB: none: Don‘t take any action. This is the default. flushMacFdb: Flush all the learned MAC addresses from the forwarding database of the selected VNID.
OvsdbConfigured	Specifies if the VNID is configured with OVSDB protocol support for VXLAN Gateway.