View Multicast Interface Information

View multicast interface information to verify the multicast configuration.

This tab shows multicast routing information specific to interfaces.

About this task

You can view multicast interface information for a Layer 3 VSN the same way you view the Global Router except that you must first launch the appropriate VRF context.

Note

Note

This procedure is supported on a DvR Controller; it is not supported on a DvR Leaf node.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Select Multicast.
  3. Select the Interfaces tab.

Interfaces field descriptions

Use the data in the following table to use the Interfaces tab.

Name

Description

Interface

Displays the slot and port number or VLAN ID for this entry.

Ttl

Displays the datagram time-to-live (TTL) threshold for the interface. IP multicast datagrams with a TTL less than this threshold are not forwarded out of the interface. The default value of 0 means that all multicast packets are forwarded out of the interface.

Protocol

Displays the protocol as one of the following:
  • other(1): none of the following

  • local(2): manually configured

  • netmgmt(3): configured by a network management protocol

  • pimSparseMode(8): PIM-SMv2

  • igmpOnly(10)

  • pimSsmMode(11)

  • spb