View Remote LSP Summary Information

About this task

Perform this procedure to view the remote link-state packet (LSP) summary information. Link State Packets (LSP) contain information about the state of adjacencies or defined and distributed static routes. Intermediate-System-to-Intermediate-System (IS-IS) exchanges this information with neighboring IS-IS routers at periodic intervals.

Procedure

  1. In the navigation pane, expand the Configuration > Fabric folders.
  2. Select IS-IS Remote.
  3. Select the LSP Summary tab.

LSP Summary Field Descriptions

Use the data in the following table to use the LSP Summary tab.

Name

Description

Level

Specifies the level at which the system displays the remote LSP.

ID

Specifies the 8-byte LSP ID, consisting of the system ID, circuit ID, and Fragment Number.

Seq

Specifies the sequence number for the LSP.

Checksum

Specifies the 16-bit Fletcher Checksum for the LSP.

LifetimeRemain

Specifies the remaining lifetime in seconds for the LSP.

HostName

Specifies the host name.