Display the Name of the Remote VTEP

Note

Exception: only supported on VSP 7200 Series, VSP 7400 Series, VSP 8200 Series, and VSP 8400 Series.

Use the following procedure to display the name of the remote VTEP.

Procedure

Enter Privileged EXEC mode:

enable
Display the names of all remote VTEPs or use the option to specify a particular VTEP:

show vtep remote name [<vtepId>]

Example

Switch:1# show vtep remote name
==========================================================================
                              Remote VTEP Name 
==========================================================================
ID     NAME             
-----------------------------------------------------------------------------
1      vxlan_tunnel_1 
2      --
3      --

-------------------------------------------------
  3 out of 3 Total Num of remote vteps
-------------------------------------------------