Configure an ACE to Filter IPv6 Routed Packets
Configure an ACE to filter IPv6 routed packets only.
Note
This procedure does not apply to VSP 8600 Series or XA1400 Series.
Before you begin
The ACL exists.
The ACE exists.
Procedure
- In the navigation pane, expand .
- Select Advanced Filters (ACE/ACLs).
- Select the Ipv6Routed tab.
- Select Insert.
- In the AclId field, type the appropriate ACL ID.
- In the AceId field, type the appropriate ACE ID.
- Select RoutedOnly.
- Select Insert.
Ipv6Routed Field Descriptions
The following table describes values on the Ipv6Routed tab.
|
Name |
Description |
|---|---|
|
AclId |
Specifies the ACL ID. |
|
AceId |
Specifies the ACE ID. |
|
RoutedOnly |
Specifies the match for IPv6 routed packets only. |