Multicast route statistics

Table 1. Mroute statistics product support

Feature

Product

Release introduced

Multicast route (mroute) statistics for IPv4 and IPv6

5320 Series

Fabric Engine 8.6

5420 Series

VOSS 8.4

5520 Series

VOSS 8.2.5

5720 Series

Fabric Engine 8.7

7520 Series

Fabric Engine 8.10

7720 Series

Fabric Engine 8.10

VSP 4450 Series

Not Supported

VSP 4900 Series

VOSS 8.1

VSP 7200 Series

VOSS 5.1

VSP 7400 Series

VOSS 8.0

VSP 8200 Series

VOSS 5.1

VSP 8400 Series

VOSS 5.1

VSP 8600 Series

Not Supported

XA1400 Series

Not Supported

The multicast route statistics feature provides statistics for multicast streams through the switch. Using the Command Line Interface (CLI), Simple Network Management Protocol (SNMP) or Enterprise Device Manager (EDM), you can track the number of senders sending multicast streams to a particular group address. You can also obtain a count of the packets or bytes being received for a particular multicast group address and the average size of the frames. Multicast route statistics are supported for both IPv4 and IPv6 group addresses.

Determining the route statistics is especially useful when debugging a multicast network and also when administering the network.

Multicast route statistics and DvR

When you enable or clear IP multicast route statistics on the Controller node of a DvR domain, the configuration is automatically pushed to the Leaf nodes within the domain.

For more information on DvR, see Distributed Virtual Routing Fundamentals.