Configure IPsec Compression

Note

Note

This procedure only applies to VSP 4900 Series and VSP 7400 Series using Fabric IPsec Gateway.

Before you begin

Ensure IPsec fragmentation before encryption is disabled.

About this task

Perform this procedure to enable IPsec compression on Fabric IPsec Gateway Virtual Machine (VM).

Note

Note

By default, IPsec compression is disabled. You must enable IPsec compression on both ends of the adjacency.

Procedure

  1. Enter Fabric IPsec Gateway Configuration mode:

    enable

    virtual-service WORD<1-128> console

    Note

    Note

    Type CTRL+Y to exit the console.

  2. Enable IPsec compression:

    set ipsec compression

9037602-00 Rev AB