Display VTEP Source Information

Note

Exception: only supported on VSP 7200 Series, VSP 7400 Series, VSP 8200 Series, and VSP 8400 Series.

Use the following procedure to display information about the VTEP source.

Procedure

Enter Privileged EXEC mode:

enable
Display the VTEP‘s source IP address and the name of the VRF:

show vtep local

Example

Switch:1# show vtep local 
==========================================================================
                              VTEP General Info 
==========================================================================
                         vtep source-ip-address: 198.51.100.1
                                      vtep vrf : GlobalRouter