Configure an ACE IP Destination Address
Configure ACE IP destination address entries to have the filter look for specific destination IP addresses.
Before you begin
The ACL exists.
The ACE exists.
Procedure
- In the navigation tree, expand the following folders: .
- Select Advanced Filters (ACE/ACLs).
- Select the ACL tab.
- Select the appropriate ACL.
- Select ACE.
- Select the appropriate ACE.
- Select IP.
- Select the Destination Address tab.
- Select Insert.
- Specify the operation type.
- In the IPAddr box, enter the destination IP address.
- Select Insert.
Destination Address field descriptions
Use the data in the following table to use the Destination Address tab.
|
Name |
Description |
|---|---|
|
AclId |
Specifies the ACL ID. |
|
AceId |
Specifies the ACE ID. |
|
Oper |
The eq and mask parameters specify an operator for a field match condition: equal to or mask. The mask operator is an implied eq on the mask bits. |
|
IPAddr |
Specifies the destination IP address. |
|
OperMask |
Specifies the mask value for the destination IP address. |