11h-power-reduction

Use the 11h-power-reduction command to enable or disable automatic power reduction of transmissions using the 802.11h standard. The 11h-power-reduction command is accessible from the wlan:<WLAN-service-name>:rf context of the CLI.

After you run the 11h-power-reduction command, run the apply command to implement the changes.

11h-power-reduction enable | disable

Parameters

enable | disable Enables or disables automatic power reduction of transmissions using the 802.11h standard.

Example

The following example enables the power reduction feature on the WLAN service:

EWC.extremenetworks.com:wlans:test:rf# 11h-power-reduction enable
EWC.extremenetworks.com:wlans:test:rf# apply
EWC.extremenetworks.com:wlans:test:rf# show 11h-power-reduction
Apply power reduction to 11h clients: enable