default-traffic-mirror

Use the default-traffic-mirror command to configure the default traffic mirror. The default-traffic-mirror command is accessible from the wlans:<named-wlan> context of the CLI.

default-traffic-mirror (prohibited | enable-both-directions | enable-in-direction-only)

Parameters

prohibited | enable-in-both-directions | enable-in-direction-only Configures the default traffic mirror for prohibited, enabled in both directions, or enabled in the in direction only.

Example

The following example configures the default traffic mirror to be enabled in both directions:

EWC.extremenetworks.com:wlans:HT_BR# default-traffic-mirror enable-both-directions