show ap_inventory

A report of Wireless APs connected to the Wireless Appliance can be displayed. This includes information about the Wireless AP‘s hardware, software, and connection status.

Use the show ap_inventory command to display a report of the Wireless APs with a pending or approved status on the Wireless Appliance.

show ap_inventory

Parameters

None

Examples

The following example displays the Wireless APs connected to the Wireless Appliance:

EWC.extremenetworks.com# show ap_inventory
Name:            0002000007515340
Serial:          0002000007515340
Desc:
Status:          approved
Software:        09.21.01.0179
Hardware:        Wireless AP3765i Internal
Wired MAC:       00:0E:8C:8F:E5:B1
Poll Timeout:    15
Poll Interval:   3
Persistent:       off
Broadcast Dissoc:  off
Client Session Maintain:enabled
Broadcast
Assn:            DHCP
IP Address:      10.208.2.244
Netmask:         255.255.255.0
Gateway:         10.208.2.2
AC Search List:   10.208.2.67

Radio Settings          Radio a     Radio b/g

802.11a                 on          -
802.11b                 _           on
802.11g                 _           on
802.11n                 off         on
DTIM Period             5           5
Beacon Period           100         100
RTS/CTS Threshold       2346        2346
Frag. Threshold         2346        2346
Channel                 5500        2452
Power Level             23          10
ATPC                    disabled    disabled
TX Power Adjust         0           0
TX Min Power            5           5
TX Max Power            23          10
ATT                     2           1
Max Operational Rate    54          54
Preamble                -           Long
N Channel Width                     40
N Channel Bonding
N Guard Interval                    Long

BSS:MAC (radio a)
20:B3:99:E1:79:40

20:B3:99:E1:79:41

BSS:MAC (radio bg)
20:B3:99:E1:79:48
20:B3:99:E1:79:49

BSS:SSID (radio a)
SSID: ACTT-208
SSID: cnlcc1404010108410000
SSID: cnl208-rt

BSS:SSID (radio bg)
SSID: ACTT-208
SSID: cnl208-rt
--