timeout-post

Use the timeout-post command to set the post-authentication timeout value (in minutes) for this WLAN service. The timeout-post command is accessible from the wlan:<WLAN-service-name> context of the CLI.

After you run the timeout-post command, run the apply command to implement the changes.

timeout-post 0-999999

Parameters

0-999999 Specify the post-authentication timeout value in minutes for this WLAN service.

Example

The following example sets the post-authentication timeout value to 10 minutes for this WLAN service:

EWC.extremenetworks.com:wlans:test# timeout-post 10
EWC.extremenetworks.com:wlans:test# apply