New topicservice

Use the service command to enable or disable an AeroScout, Ekahau, or Centrak location-based service on the Wireless Appliance. The service command is accessible from the lbs context of the CLI.

service disable | aeroscout | ekahau | centrak

Parameters

disable Disables location-based service.
aeroscout Enables Aeroscout location-based service.
ekahau Enables Ekahau location-based service.
centrak Enables Centrak location-based service.

Usage

After enabling the location based service using the service command, specify the IP address, port, and multicast address with the respective commands.
  • Enter the IP address of the location based service server.
  • Centrak and Ekahau configuration offer a default port number and multicast address, but you can modify the default values if necessary.

Now assign APs to participate in the location-based service.

For more information, see lbs-status.

Examples

The following example enables the Centrak location-based service:

EWC.extremenetworks.com# lbs
EWC.extremenetworks.com:lbs# service centrak