Use the mac-auto-authenticate command to automatically authenticate authorized users. The mac-auto-authenticate command is accessible from the wlans:<WLAN-service-name>:auth context of the CLI.
After you run the mac-auto-authenticate command, run the apply command to implement the changes.
enable | disable | Specify to enable or disable automatic authentication of authorized users |
The mac-auto-authenticate command is available in all authentication modes, if MAC authentication is enabled, using the mac enable command. For authentication mode command information, see mode. For mac command information, see mac.
The following example enables automatic authentication of authorized users on the cnl-mac WLANS service:
EWC.extremenetworks.com:wlans:cnl-mac:auth# mac-auto-authenticate enable EWC.extremenetworks.com:wlans:cnl-mac:auth# apply