acct-port

Use the acct-port command to set the port for RADIUS accounting. The acct-port command is accessible from the vnsmode:radius:<named_RADIUS _server> context of the CLI.

If you do not change the port with this command, the default port 1813 is used.

acct-port 0-65535

Parameters

0-65535 Specifies the RADIUS accounting port

Example

The following example sets the RADIUS accounting port to 1646 for the RADIUS server named RAD1:

EWC.extremenetworks.com:vnsmode:radius:RAD1# acct-port 1646