protocol

Use the protocol command to set the authentication password for this site. The protocol command is accessible from the site:<named-site> context.

protocol (CHAP|PAP|MS-CHAP|MS-CHAP2)

Parameters

CHAP|PAP|MS-CHAP|MS-CHAP2 Specifies an authentication protocol type. Valid values are CHAP, PAP, MS-CHAP, and MS-CHAP2.

Usage

The CLI <named-site> context must be in config mode for a RADIUS server to execute the protocol command. Use the config radius name command to enter config mode. Use config exit to exit config mode.

Example

The following example sets the authentication protocol to PAP:

EWC.extremenetworks.com:site:site1# protocol PAP