assign-ap

Use the assign-ap command to add or remove an AP from the site.

The assign-ap command is accessible from the site:<named-site> context.

assign-ap (add|delete) ap serial

Parameters

add | delete Specifies whether to add or delete the identified AP.
ap serial Specifies the AP to be assigned by its serial number.

Usage

You specify the AP by its serial number. If you enter the command without an AP serial number, the CLI displays a list of available APs by their serial numbers and, if named to the system by an ap:<serial> context name command, the AP name.

Examples

The following example shows a listing of available APs:

EWC.extremenetworks.com:site:site1# assign-ap
The available APs:
0500009353050067(EWC-3801)
050000829F737045(050000829F737045)
0409920201204015(C25-AP3710)
0500009203050048(C25-AP3705-50048)
0500009203050013(C25-AP3705)
10490066235A0000(AP-3801-Ext)
0509920201203250(EWC-AP-3710-3705-Ext)
0002000819006723(C25-AP3801)
0002010803508865(0002010803508865)
10210066235A0000(C25-AP3705)

This example shows AP added to the site1 site:

EWC.extremenetworks.com:site:site1# assign-ap add 050000829F737045