group-key-ps

Use the group-key-ps command to enable or disable the group key power save retry. The group-key-ps command is available only if the mode command is set to wpa-psk. The group-key-ps command is accessible from the wlan:<WLAN-service-name>:priv context of the CLI when the WLAN service type is STD.

group-key-ps enable | disable

Parameters

enable Specify to enable the group key power save retry.
disable Specify to disable the group key power save retry.

Example

The following example enable the group key power save retry on the WLAN CNL-208-0:

EWC.extremenetworks.com:wlans:CNL-208-0:priv# group-key-ps enable