Use the occupancy_threshold command to set the DCS Channel Occupancy Threshold. The occupancy_threshold command is accessible from all radio dcs contexts of the CLI.
| thrshold | Specifies the DCS Occupancy Threshold as a percentage. The DCS Occupancy Threshold must be in the 10 to 100 range. |
The following example sets the DCS Channel Occupancy Threshold to 10 per cent:
EWC.extremenetworks.com:ap:defaults:ap37xx:radio1:dcs# occupancy_threshold 10
Print
this page
Email this topic
Feedback
View PDF
Download EPUB