use-policy-zone

Use the use-policy-zone command to enable or disable a policy zone at a called station. The use-policy-zone command is accessible from the wlan:<WLAN-service-name>:auth context of the CLI.

After you run the use-policy-zone command, run the apply command to implement the changes.

use-policy-zone enable | disable

Parameters

enable | disable Enables or disables the policy zone on this WLAN.

Example

The following example enables the policy zone on the test WLAN:

EWC.extremenetworks.com:wlans:test:auth# use-policy-zone enable
EWC.extremenetworks.com:wlans:test:auth# apply
EWC.extremenetworks.com:wlans:test:auth# show use-policy-zone
Use policy zone name in Called-Station-Id: enable