fqdn

Use the fqdn command, within context wlan:<WLAN-service-name>:auth:captiveportal, to replace the Gateway IP address with a Fully Qualified Domain Name (FQDN).

After you run the fqdn command, run the apply command to implement the changes.

fqdn value_string | none

Parameters

value_string Specifies a domain name
none Specifies that the Gateway IP address is not replaced with a FQDN

Usage

The guestportal, internal, or splash authentication mode must be set for this command to be available. For more information, see mode.

Example

The following example replaces the Gateway IP address with a domain name:

EWC.extremenetworks.com:vnsmode:CNL-7-CP:auth:captiveportal# fqdn cp.siemens.com
EWC.extremenetworks.com:vnsmode:CNL-7-CP:auth:captiveportal# apply