multicast

Use the multicast command to set the location-based server multicast address. The multicast command is accessible from the lbs context of the CLI.

multicast 0x:0x:0x:0x:0x:0x

Parameters

0x:0x:0x:0x:0x:0x Specifies the multicast address of the location-based server, in hexadecimal format.

Usage

This command is visible only if a location-based service has been enabled via the service command.

The default multicast address is 00:00:00:00:00:00

Examples

The following example sets the multicast address of the Ekahau server to 01:18:8e:00:00:00:

EWC.extremenetworks.com:lbs# service ekahau
EWC.extremenetworks.com:lbs# multicast 01:18:8e:00:00:00