show

Use the show command to display the <named-site> configuration information for the current site:<named-site> context. The show command is accessible from within the site:<named-site> context.

Syntax

show

Parameters

None.

Example

The following example displays the site1 site configuration from within the site:<named-site> context:

EWC.extremenetworks.com:site# site1
EWC.extremenetworks.com:site:site1# show
Name: site1
Local Radius Authentication: enable
Band Preference: disable
Radio1 Load Control: disable
Radio2 Load Control: disable
DNS servers: 0.0.0.0
policy assignment: Unauth,Auth,SiteAuth
WLAN service assignment:
wlan_east both
No radius server has been selected
Priority  Name    Role  NAS IP              NAS ID        Auth Type
1         NPS_R2  auth  Use VNS IP address  Use VNS name  MS-CHAP2
Secure Tunnel: enable
Control Traffic Encryption(Controller): enable
Control Traffic Encryption(APs): enable
Replace Station ID: enable
EWC.extremenetworks.com:site:site1#