gateway

Use the gateway command to specify the gateway IP address. The gateway command is available from the topology:<named-topology>:l3:dhcp context of the CLI for b@ac and physical topologies. For information about the gateway command for the Admin topology, see gateway.

gateway A.B.C.D | none

Parameters

A.B.C.D Specifies the IP address of the remote Wireless Appliance.
none Clears the IP address of the remote Wireless Appliance.

Example

The following example clears the gateway IP address:
EWC.extremenetworks.com:topology:esa1:l3:dhcp# gateway none