Use the priority command to configure 802.1p user priority (UP) for this CoS.
The priority command is accessible from within the cos:<named-cos> context.
| 0-7 | Defines user priority level for this CoS; 7 is highest priority. |
| none | User priority level is not assigned for this CoS. |
WLAN marking must be disabled when you use this command.
The following example assigns a user priority value of 3 to the CoS:
EWC.extremenetworks.com:cos:my-cos# priority 3
Print
this page
Email this topic
Feedback
View PDF
Download EPUB