protocol

Use the protocol command to set the security protocol used with the RADIUS server. The protocol command is accessible from the vnsmode:radius: <named_RADIUS_server> context of the CLI.

protocol [CHAP|MS-CHAP|MS-CHAP2|PAP]

Parameters

CHAP|MS-CHAP|MS-CHAP2|PAP Specifies the security protocol that is used between the RADIUS Server and the Wireless Appliance.

Examples

The following example sets the security protocol to PAP for the RADIUS server named RAD1:

EWC.extremenetworks.com:vnsmode:radius:RAD1# protocol PAP