port

Use the port command to enable or disable the port from within the appropriate port context for your platform:

  • l2ports:esaN# is available on the C25, V2110, C5110 and C5210 controllers. See esaN.
  • l2ports:portN# is available on the C4110 controller. See portN.
port enable | disable

Parameters

enable Enables the port for this context.
disable Disables the port for this context.

Examples

The following example enables the ESA1 port in an l2ports:esa1# context:

EWC.extremenetworks.com# l2ports
EWC.extremenetworks.com:l2ports# esa1
EWC.extremenetworks.com:l2ports:esa1# port enable
EWC.extremenetworks.com:l2ports:esa1# apply
EWC.extremenetworks.com:l2ports:esa1# show
Port: enable
EWC.extremenetworks.com:l2ports:esa1#