server-ip

Use the server-ip command to set the location-based server IP address. The server-ip command is accessible from the lbs context of the CLI.

server-ip A.B.C.D

Parameters

A.B.C.D Specifies the IP address of the location-based server.

Usage

This command is visible only if a location-based service has been enabled via the service command.

The default IP address is 0.0.0.0.

Examples

The following example sets the IP address of the AeroScout server to 192.168.3.100:

EWC.extremenetworks.com:lbs# service aeroscout
EWC.extremenetworks.com:lbs# server-ip 192.168.3.100