show ap (AP Configuration)

Use the show ap command to show the configuration information of Wireless APs connected to the Wireless Appliance.

show ap [access | registration | version | load-groups | (defaults (config|3935FCC|ap37xx|ap38xx|ap3801))| (ap_serial [clients | static_config | config | radio1 | radio2 | version | professional_antenna])]

Use ap37xx to modify ap37xx and W78xC ap defaults settings.

Parameters

access Displays the status of the Wireless APs.
registration Displays the registration information.
version Displays the software version installed on Wireless APs.
load-groups Displays the configured load groups.
defaults Displays the Dynamic Radio Frequency management settings.
config Displays the configured values of the Wireless AP.
Specific model number that depends on the license of the controller. For example, 3935FCC
  • 3935FCC
  • 3935ROW
  • 3965FCC
  • 3965ROW
Displays the configured values of the Wireless APs. This can be any of the following models with the specific regulatory domain license:
  • 3935FCC
  • 3935ROW
  • 3965FCC
  • 3965ROW
ap37xx Displays the configured values of the 37xx access point.
ap38xx Displays the configured values of the 38xx access point.
ap3801 Displays the configured values of the 3801 access point.
ap_serial Specifies the serial number of a specific Wireless AP.
clients Displays the clients connected to the Wireless AP.
static_config Displays the static configuration values.
config Displays the configured values for the Wireless AP.
radio1 Displays the Wireless AP‘s radio 1 settings.
radio2 Displays the Wireless AP‘s radio 2 settings.
version Displays the software version and hardware type of the Wireless AP.
professional_antenna Displays the professional_antenna settings.

Examples

The following example displays the serial number, name, and platform of connected Wireless APs:
EWC.extremenetworks.com# show ap
serial 000000VPC1553827 W788C_06 W788C-2-RJ45
serial 0000141600020802 3865e_13 AP3865e
serial 12341770905A0000 3705i_01 AP3705i
serial 12343567905A0000 3705i_02 AP3705i
serial 13140663595A0000 3710i_03 AP3710i
serial 13440720085E0000 3715i_04-05 AP3715i-1
serial 1404009608410000 3825e_16-17 AP3825e
serial 1404013908410000 3825i_09-10 AP3825i
serial 14160231085A0000 3825e_11-12 AP3825e
serial 1450451508410000 3801i_07 AP3801i
serial 1525D10061100000 3935e-ROW_14-15 AP3935e-ROW
serial 1541D20040490000 3935i-ROW_18 AP3935i-ROW
serial 1544Y-1001600000 3935i-ROW_19 AP3935i-ROW
serial 2014180500000012 3805e_08 AP3805e
The following example displays the registration status of the Wireless APs:
EWC.extremenetworks.com# show ap access
0122003880188015  LOCAL  APPROVED
0409920201204003 LOCAL  APPROVED
12343502905A0000  LOCAL  APPROVED  ACTIVE
1306032659480000  LOCAL  APPROVED  ACTIVE
The following example displays the registration information:
EWC.extremenetworks.com# show ap registration
security on
dinterval 10
dretry 2
Cluster encryption: enable
Cluster inter AP roam: enable
Cluster shared secret: ********
The following example displays standard ap defaults information:
EWC.extremenetworks.comshow ap defaults 3935FCC
ssh enabled
poll_timeout 15
no client_session
no persistent
no bcast_disassoc
country United States
no lldp
led-mode normal
lbs-status enabled
secure-tunnel disable
ipmcast-assembly disabled
balanced-power enabled
The following example displays the clients connected to the Wireless AP with the serial 0409920201204003:
EWC.extremenetworks.com# show ap 0409920201204003 clients

Client IP      Client   Protoc   Radi   BSS MAC   SSID     Auth   Time   User   Roam
               MAC      ol       o                         /      Conn.         ed
                                                           Priv
172.16.50.     00:40:9  g        2      00:0F:B   CNL-     EAP/   0:21:  test1   NO
250            6:AB:61                  B:09:F6   220-14-  WPA    14
               :58                      :A2       3-ssid
Total 1
show ap clients output, continued:
Policy   Topolo   RSS    Avg.     Bytes   Packets   UL Drop  DL Drop   DL Drop   DL Lost
         gy       (dBm)  Rate     Sent/   Sent/     Rate     Rate      Buffer    Retrie
                         (Mbps)   Receive Received  Packet   Packet    Packet    s
                         Sent/    d       d         s/       s/        s/        Packet
                         Recvd                      Bytes    Bytes     Bytes     s/
                                                                                 Bytes

CNL-220-   CNL-   -25    54.0/   1212/   297250/    0/0      0/0       0/0       0/0
14-3-      220-          54.0    2047    279660
default    14-3
The following example displays the static configuration values of the Wireless AP:
EWC.extremenetworks.com# show ap 0409920201204003 static_config
Static IP Address: 10.205.0.11
Static Netmask:    255.255.255.0
Static Gateway:    10.205.0.2
AC IP: 10.205.0.1
AC Order: 1
The following example displays the configuration information of the Wireless AP with the serial number 1111111111139351
EWC.extremenetworks.com# show ap 1111111111139351 config
AP Serial Number: 1111111111139351
AP host name: AP3935i-1111111111139351
AP Name: 3935i
Description:
Active # of clients: 0
AP software version: 10.01.01.0123
Status: approved
role : ap
Home: local
DHCP IP address: 0.0.0.0
DHCP NetMask: 0.0.0.0
DHCP Gateway: 0.0.0.0
Hardware Type: Wireless AP3935i-FCC Internal
Wired MAC address: 00:00:00:00:00:00
The following example displays the Wireless AP's (3935FCC) radio 1 settings:
EWC.extremenetworks.com#  show ap 1111111111139351 radio1
dtim  5
beaconp 100
nonUnicastQuota 100
rts 2346
frag 2346
domain  fjdkfj.jfadkl
tx_max_power 10 dBm
radio mode anac
no atpc
minbrate 6
n_chlwidth auto
current channel None
last requested channel 40: (5180,[5200],5220,5240)
n_guardinterval short
n_pmode auto
n_ptype cts only
n_pbthreshold 50
no n_aggr_msdu
n_aggr_mpdu
n_aggr_mpdu_max 1048575
n_aggr_mpdu_max_subframes 30
n_addba_support
probe-suppression disable
admin-mode on
ldpc enable
stbc enable
txbf mu_mimo
optimized-mcast disable
mcast-adaptable disable
mcast2ucast disabled
current_power: 0
dcs mode monitor
channel_plan all-non-dfs
noise_threshold -80
occupancy_threshold 100
update_period 5
The following example displays the Wireless AP‘s (3935FCC) radio 2 setting:
EWC.extremenetworks.com# show ap 1111111111139351 radio2
dtim  5
beaconp 100
nonUnicastQuota 100
rts 2346
frag 2346
domain  MyDomain
preamble long
tx_max_power 13 dBm
pmode auto
prate 11
ptype cts only
radio mode bgn
no atpc
minbrate 1
n_chlwidth auto
current channel None
last requested channel Auto
n_guardinterval short
n_pmode auto
n_ptype cts only
n_pbthreshold 50
no n_aggr_msdu
n_aggr_mpdu
n_aggr_mpdu_max 65535
n_aggr_mpdu_max_subframes 30
no n_addba_support
probe-suppression disable
admin-mode on
ldpc enable
stbc enable
optimized-mcast disable
mcast-adaptable disable
mcast2ucast disabled
current_power: 0
dcs mode monitor
channel_plan auto
noise_threshold -80
occupancy_threshold 100
update_period 5
interference-wait-time 10

interference-event-type none
The following example displays the software version and hardware type for the Wireless AP:
EWC.extremenetworks.com# show ap 1111111111139351 version
Software version: 10.01.01.0123
Hardware Type: Wireless AP3935i-FCC Internal
The following example displays the software version installed on all Wireless APs:
EWC.extremenetworks.com# show ap version
Serial: 1111111111139351                Version: 10.01.01.0123
Serial: 1111111111138251                Version: 10.01.01.0123
Serial: 13310619085D0000                Version: 10.01.01.0123
Serial: 1111111111137152                Version: 10.01.01.0123
The following example displays the load groups:
EWC.extremenetworks.com# show ap load-groups
Load Groups:
Name: CNL_201_Radio-001                 Type : radio
Name: CNL_201_Client_Balancing-002      Type : client
Name: CNL_201_Radio-008                 Type : radio
Name: Radio-001                         Type : radio
Name: CNL_201_Client_Balancing-001      Type : client