show

Use the show command to display topology configuration information.

show [topology name]

Parameters

topology name Displays information about the specified topology.

Examples

The following example displays information for all configured topologies:

EWC.extremenetworks.com:topology# show
Name               Mode      L2:VlanId,tagged,port     L3:IP,GW,DHCP           L3:IPv6,Auto-Generated
Admin              admin       N/A,N/A,Admin       192.168.3.13,192.168.3.7,N/A fd66:2280:2668::0013,fd66:228:2668:0000:862b:2bff:fe60:2a8a 64;fe80:0000:0000:0000:862b:2bff:fe60:2a8a 64
Bridged at AP   untagged    b@ap 123,enable,N/A
Port1           physical    103,disable,Port1      10.13.0.1,10.13.0.9,local
Port2           physical    2,disable,Port2        10.13.1.1,none,none
Port3           physical    U,disable,Port3        10.0.2.1,none,none
Port4           physical    U,disable,Port4        10.0.3.1,none,none
Seg1_Routed    routed       N/A,N/A,N/A            172.16.209.1,none,local
Seg2_Routed    routed       N/A,N/A,N/A            172.16.210.1,none,local
ACTT_Seg1_Routed routed    N/A,N/A,N/A            10.13.16.1,none,local
ACTT_Seg2_Routed routed    N/A,N/A,N/A            10.13.32.1,none,local
route1            routed    N/A,N/A,N/A            5.5.5.5,none,local
TopoFor313                    b@ap 553,enable,N/A
Topology global info:
Internal VLAN ID: 1
Multicast support: disabled

The following example displays information for a physical topology named esa0:

EWC.extremenetworks.com:topology:esa0# show
Topology mode: physical
Name: esa0
3rd party: disable
Layer 3 presence: enable