Use the ping command to ping the specified IP address for a response. The ping command is accessible from the site:<named-site> context.
[source-interface (name name) | (number id)] | Specifies that the source interface be pinged, by name or by ID number. |
ip address | Specifies an IP address for the server. The IP address can be either IPv4 (A.B.C.D) or IPv6 (A:B:C:D:E:F:G:H) format. |
The following example pings the RADIUS server configured for site1:
EWC.extremenetworks.com:site:site1# ping source-interface name james 192.168.77.7