Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

default-env-mode

Use the default-env-mode command to set the default mode for the environment in which the APs at this location are operating. The default-env-mode command is accessible from the location context of the CLI.

default-env-mode (0 | 1 | 2 | 3 | 4)

Parameters

0 | 1 | 2 | 3 | 4 Specifies the default environmental mode for this location. Valid values are:
  • 0: Indoor open space (halls, auditoriums)
  • 1: Office Environment with light divisions (cubicles)
  • 2: Office Environment with dry walls divisions
  • 3: Office Environment with hard divisions (brick)
  • 4: Interior Walls (need be defined in the floor plan)

Examples

The following example sets the default environmental mode to indoor open space:

EWC.extremenetworks.com:location# default-env-mode 0
Published December 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page