ip

Use the ip command to specify the Wireless Appliance IP address and subnet mask for physical and routed topologies or the interface IP address and subnet mask for b@ac topologies. The ip command is available from the topology:<named-topology>:l3 context of the CLI for Admin, b@ac, physical, and routed topologies.

ip A.B.C.D/0-32

Parameters

A.B.C.D/0-32 Specifies the IP address and subnet mask.

Example

The following example specifies an IP address and subnet mask:

EWC.extremenetworks.com:topology:r1:l3:# ip 10.109.0.1/30