txbf

Use the txbf command to enable or disable the 11n advanced TXBF feature. The txbf command is accessible from the ap:defaults: context and the ap:<serial> radio contexts for the following AP models:
  • ap37xx
  • ap38xx (radio 2)
  • ap3801 (radio 2)
  • ap3935 (FCC and ROW, radio 1)
  • ap3965 (FCC and ROW, radio 1)
  • ap3912 (FCC, radio 1)

The available parameters depend on the AP type and the radio.

txbf enable | disable or txbf mu_mimo enable | disable for AP3935 and AP3965 on Radio 1.

Usage

When TXBF is enabled, antenna selection must be left-middle-right.

Parameters

enable Enables the 11n advanced TXBF feature.
disable Disables the 11n advanced TXBF feature.
mu_mimo Sets TxBF to MU-MIMO.

Example

The following example enables TXBF on radio1:

EWC.extremenetworks.com:ap:defaults:ap37xx:radio1# txbf enable