Use the default-topology command to assign an existing B@AC, B@AP, or routed topology as the default topology for the specified WLAN service. You can also use the default-topology command to unassign the default topology. The default-topology command is accessible from the wlans:<WLAN-service-name> context of the CLI.
For information about B@AC, B@AP, and routed topologies, refer to topology Commands.
| Default topology name | Specify default topology to assign to the WLAN service |
| none | Unassign the default topology from the WLAN service |
The following example assigns the topology FS-REMOTE to the WLAN service:
EWC.extremenetworks.com:wlans:gp1# default-topology FS-REMOTE
Print
this page
Email this topic
Feedback
View PDF
Download EPUB