show

Use the show command to display information about a topology. The show command is available from the topology:<named-topology> context of the CLI for Admin, b@ac, b@ap, physical, and routed topologies.

show

Parameters

None

Examples

The following examples shows configuration information for the Admin topology:

EWC.extremenetworks.com:topology:Admin# show
Name: Admin

The following example shows configuration information for a b@ac topology:

EWC.extremenetworks.com:topology:BridgedAC2# show
Synchronize: disable
Name: BridgedAC2
Layer 3 presence: disable

The following example shows configuration information for a b@ap topology:

EWC.extremenetworks.com:topology:BridgedAP2# show
Synchronize: enable
Name: BridgedAP2

The following example shows configuration information for a physical topology:

EWC.extremenetworks.com:topology:esa0# show
Name: esa0
3rd party: disable

The following example shows configuration information for a routed topology:

EWC.extremenetworks.com:topology:r1# show
Topology mode: routed
Synchronize: enable
Name: r1