show flash

Use the show flash command to display whether the flash device is mounted or not.

show flash status | sysinfo | list

Parameters

status Displays whether the flash device is mounted or not.
sysinfo Displays the memory usage information of the flash device.
list Displays all the files on the flash device.

Usage

The show flash command is applicable only to the Wireless Appliances that support flash devices.

Examples

The following example displays that the flash device is mounted:

EWC.extremenetworks.com# show flash status
flash mounted

The following example displays the following memory usage information of the flash device:

  • Size – Total capacity of the flash device.
  • Used – Space used so far.
  • Available – Space available for use.
  • Use % – Space used in percentage.
EWC.extremenetworks.com# show flash sysinfo
Size    Used    Available    Use %
3.9G    32k     3.9G         1%

The following example displays the list of files that are saved on the flash device:

EWC.extremenetworks.com# show flash list
AC-MV-gxs-V5R3.10007.0-1.tar
gxs-V5R3.10007.0-1-rescue.tgz