trap-manager-v3

Use the trap-manager-v3 command to identify either the primary or secondary machine monitoring SNMPv3 traps by IP address.

trap-manager-v3 (1|2) (IP address | delete)

Parameters

1|2 Identifies the primary or secondary machine monitoring SNMPv3 traps
IP address Specifies the IP address of the machine monitoring SNMPv3 traps. The IP address can be either IPv4 (A.B.C.D) or IPv6 (A:B:C:D:E:F:G:H) format.
delete Removes the SNMPv3 machine monitoring SNMPv3 traps

Examples

The following example specifies the IP address of the primary machine monitoring SNMPv3 traps and the SNMPv3 user “admin”:

EWC.extremenetworks.com:snmp# trap-manager-v3 1 192.168.1.5 

The following example deletes the primary trap manager configured in the previous example:

EWC.extremenetworks.com:snmp# trap-manager-v3 1 delete