Use this command to configure the attenuation for this radio context. The att command is accessible only from ap:<serial>:radio1 and ap:<serial>:radio2 contexts for APs with external antennas.
att-value | Specifies a radio attenuation value between 0 - 30 |
This example sets the attenuation value to 10 for the AP 0409920201204003 radio2 context:
EWC.extremenetworks.com:ap:0409920201204003:radio2# att 10 EWC.extremenetworks.com:ap:0409920201204003:radio2# apply