auth-port

Use the auth-port command to set the priority for RADIUS authentication. The auth-port command is accessible from the vnsmode:radius:<named_ RADIUS_server> context of the CLI. If you do not change the authentication port number with this command, the controller uses the default port 1812.

auth-port 0-65535

Parameters

0-65535 Specifies the RADIUS authentication port.

Examples

The following example sets the port for RADIUS authentication to port 1816 for the RADIUS server named RAD1:

EWC.extremenetworks.com:vnsmode:radius:RAD1# auth-port 1816