leftantenna-radio1

Use the leftantenna-radio1 command to select an antenna supported by the Wireless AP. This command is accessible from the <serial> context of the CLI if the AP supports configuration of a left radio1 antenna. For AP models that support the Professional Install feature, leftantenna-radio1 is accessible from the ap:<serial>:professional_antenna# context. To display a list of the available antenna models, enter the command without arguments.

The antenna commands available are dependent on the AP type.

leftantenna-radio1 antenna_model

Parameters

antenna_model Model name of an antenna supported by the Wireless AP.

Examples

This example lists the valid antenna models that can be entered with this command, then executes the command with an appropriate model number:

EWC.extremenetworks.com:ap:0500010032150135 leftantenna-radio1
Usage: leftantenna-radio1 <antenna_model>
antenna_model:
<list of valid antenna models>
WS-AO-2S03360 G 3.5 dBi Omni
No Antenna
EWC.extremenetworks.com:ap:0500010032150135 leftantenna-radio1 WS-AO-2S03360 G 3.5 dBi Omni

This example removes a configured left radio1 antenna:

EWC.extremenetworks.com:ap:0500010032150135# leftantenna-radio1 No Antenna