config

Use the config command to configure a RADIUS server as the local authentication server for APs assigned to this site. The config command is accessible from the site:<named-site> context.

config radius name [prot (CHAP|PAP|MS-CHAP|MS-CHAP2)] | exit

Parameters

radius name Specifies the RADIUS server to be assigned to this site, and enters config mode for the named server.
prot CHAP|PAP|MS-CHAP|MS-CHAP2 Specifies the authentication protocol to be used with this RADIUS server.

Values are CHAP, PAP, MS-CHAP, and MS-CHAP2.

exit Exits config mode.

Usage

Enter config radius name to enter config mode for that server. Enter config exit to exit config mode.

Example

The following example assigns RADIUS server R-1 to site1, and enters config mode for R-1:

EWC.extremenetworks.com:site:site1# config R-1