ipv6

Use the ipv6 command to specify a management IPv6 address and subnet mask for the Wireless Appliance. The ipv6 command is available from the topology:<named-topology>:l3 context of the CLI for the Admin topology only.

ipv6 A:B:C:D:E:F:G:H/0-64 | none

Parameters

A:B:C:D:E:F:G:H/0-64 Specifies the IPv6 address and subnet mask.
none Specifies that there is no IPv6 address configured for this controller.

Example

The following example specifies an IP address and subnet mask:

EWC.extremenetworks.com:topology:Admin:l3:# ipv6 fd66:2280:2668::13/64