port

Use the port command to configure the port number used for rogue detection on the AP. The port command is accessible from the mitigator:scprof:<named scan profile> context of the CLI and the mitigator:gsprof:<named guardian scan profile> context of the CLI. (Guardian also scans for Rogues.)

The port command is only available if security scan is enabled.

port port-number

Parameters

port-number Specifies the number of the port used for rogue detection on the AP. Valid port numbers are 1-32768.

Example

The following example specifies port 1538 as the port used for rogue detection on the AP for the scp_name scan profile in-service:

EWC.extremenetworks.com:mitigator:scprof:in-service# port 1538
EWC.extremenetworks.com:mitigator:scprof:in-service#