rogue

Use the rogue command to enable or disable rogue detection for this scan profile. The rogue command is accessible from the mitigator:scprof:<named scan profile> context of the CLI.

The rogue command is only available if security scan is enabled (see security-scan).

rogue enable | disable

Parameters

enable Enables rogue detection for this scan profile.
disable Disables rogue detection for this scan profile.

Example

The following example enables rogue detection for the scp_name scan profile in-service:

EWC.extremenetworks.com:mitigator:scprof:in-service# rogue enable
EWC.extremenetworks.com:mitigator:scprof:in-service#