priority-override-dscp

Use the priority-override-dscp command to override existing DSCP codepoint assignments for priority processing and use a single DSCP codepoint for the WLANS. The priority-override-dscp command is accessible from the wlan:<WLAN-service-name>:qos-policy context of the CLI.

After you run the priority-override-dscp command, run the apply command to implement the changes.

priority-override-dscp 0-64

Parameters

0-64 Specifies a DSCP codepoint value. Default value: 0.

Usage

This command is only active if the priority-override command has been enabled. For more information, see priority-override.

Example

The following example overrides all existing DSCP codepoint assignments and uses DSCP codepoint 2 for the CNL-7-CP WLANS:

EWC.extremenetworks.com:wlans:CNL-7-CP:qos-policy# priority-override-dscp 2
EWC.extremenetworks.com:wlans:CNL-7-CP:qos-policy# apply
EWC.extremenetworks.com:wlans:CNL-7-CP:qos-policy# show priority-override-dscp
DSCP marking: 2